root@KURO-BOX:~# cd /
root@KURO-BOX:/# umount -a;sync;sync;sync;insmod nbp_rgstr: Address already in use
Can't register KURO-BOX:Workstation@*
nbp_rgstr: Address already in use
Can't register KURO-BOX:netatalk@*
t/netbsd-INSTALL.binkernel=/roo
umount: /: device is busy
flushing ide devices: hda
cpu freq = 260143200
memory freq = 130071600
memory size = 134217728
startkernel 90000
endkernel 4ba000
startsym 4ad914
endsym 4ad914
avail_end 8000000
availmemr[0].start 4ba000
availmemr[0].size 7b46000
btinfo = 0x00000000
bootdev=0x00000000
boothowto=0x00000000
[ Kernel symbol table missing! ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.3 (INSTALL) #1: Fri Oct  6 18:49:34 JST 2006
        root@trapani:/work/src/sys/arch/sandpoint/compile/obj/INSTALL
total memory = 128 MB
avail memory = 119 MB
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 90c000<DOZE,DPM,ICE,DCE>, powersave: 1
cpu0: 260.14MHz
eumb0 at mainbus0
ociic0 at eumb0 addr 0xfc003000 irq 5: On-Chip I2C controller
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
com0 at eumb0 addr 0xfc004600 irq 14: ns16550a, working fifo
com0: console
com1 at eumb0 addr 0xfc004500 irq 13: ns16550a, working fifo
pci0 at mainbus0 bus 0
pci0: i/o space, memory space enabled
pci0: can't establish powerhook
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
re0 at pci0 dev 11 function 0: RealTek 8169S Single-chip Gigabit Ethernet
re0: interrupting at irq 0
re0: Ethernet address 00:07:40:ce:75:86
ukphy0 at re0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x00e04c, model 0x0011, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
cmdide0 at pci0 dev 12 function 0
cmdide0: Silicon Image 0680 (rev. 0x02)
cmdide0: bus-master DMA support present
cmdide0: primary channel wired to native-PCI mode
cmdide0: using irq 1 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to native-PCI mode
atabus1 at cmdide0 channel 1
ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at irq 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at irq 3
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at irq 3
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
biomask a netmask b ttymask b
md0: internal 2048 KB image area
wd0 at atabus0 drive 0: <HDT722516DLAT80>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 153 GB, 319120 cyl, 16 head, 63 sec, 512 bytes/sect x 321672960 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
WARNING: clock lost 343 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
erase ^H, werase ^W, kill ^U, intr ^C, status ^T
Terminal type? [vt100]