1 = SMS Menu                          5 = Default Boot List
          8 = Open Firmware Prompt              6 = Stored Boot List

       memory      keyboard     network      scsi      speaker      
 ok
0 > boot net     
LOAD: Waiting 60 seconds for Spanning Tree
BOOTP R = 1 BOOTP S = 1  
FILE: /ofwboot
Load Addr=0x4000 Max Size=0xbfc000 
FINAL Packet Count = 112   Final File Size = 56984 bytes.

Unexpected Firmware Error:
DEFAULT CATCH!, code=fff00300 at   %SRR0: 00c1b030   %SRR1: 00003030 
 ok
0 > go 
>> NetBSD/ofppc OpenFirmware Boot, Revision 1.5
>> (root@st4200, Sat Aug 12 18:27:46 JST 2006)
net_open: client addr: 192.168.1.208
net_open: subnet mask: 255.255.255.0
net_open: server addr: 192.168.1.211
net_open: server path: /export/tftpboot/chroot
net_open: file name: /ofwboot
Using IP address: 192.168.1.208
root addr=192.168.1.211 path=/export/tftpboot/chroot
mount succeede...
2692084+209968 [143280+134141]=0x3087a0
 start=0x100000
device_type='chrp' => CHRP Memory Map
Done calling uvm_page_physload()
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.1 (GENERIC) #17: Thu Aug 24 13:15:51 JST 2006
        makoto@st4200:/export/20060821/sys/arch/ofppc/compile/obj/GENERIC
total memory = 256 MB
avail memory = 241 MB
bootpath /pci@80000000/ethernet@c/netbsd.ofppc
cbootpath /pci@80000000/ethernet@c
mainbus0 (root): IBM,7046-B50
cpu0 at mainbus0 (PowerPC,604e@0): 604e (Revision 1.2), ID 0 (primary)
cpu0: HID0 c001c086<EMCP,DBP,NHR,ICE,DCE,SGE,BHT,NOPDST>, powersave: 1
cpu0: 375.00 MHz
ofbus0 at mainbus0 (event-sources)
epow-events at ofbus0 not configured
memory-controller@fec00000 at mainbus0 not configured
ofbus1 at mainbus0 (rom@ff000000)
boot-rom@fff00000 at ofbus1 not configured
rtas at mainbus0 not configured
chrp0 at mainbus0 (pci@80000000)chrp_isa_init

pci0 at chrp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Motorola MPC106 PCI Bridge
pcib0 at pci0 dev 11 function 0: 
pcib0: vendor 0x10ad product 0x0565 (rev. 0x10)
slide0 at pci0 dev 11 function 1
slide0: Symphony Labs 82C105 IDE controller (rev. 0x05)
slide0: device disabled (at device)
Fixing AMD PCnetPCI Vendor ID.
pcn0 at pci0 dev 12 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c971 PCnet-FAST rev 6, Ethernet address 00:04:ac:17:87:95
pcn0: interrupting at irq 6
nsphy0 at pcn0 phy 1: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0 at pcn0 phy 31: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000058, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, auto
mpic0 at pci0 dev 13 function 0: vendor 0x1014 product 0x0046 (rev. 0x00)
esiop0 at pci0 dev 16 function 0: Symbios Logic 53c875 (ultra-wide scsi)
esiop0: using on-board RAM
esiop0: interrupting at irq 7
esiop0: scsi bus reset
scsibus0 at esiop0: 16 targets, 8 luns per target
vendor 0x102b product 0x0520 (VGA display, revision 0x01) at pci0 dev 22 function 0 not configured
scsibus0: waiting 2 seconds for devices to settle...