I/O system initialized... Memory Enabled: [ 128MB at CL=2 ] Caches Enabled: [ L1I(16K), L1D(16K) ] Register Inits: [ 32 GPRs, 32 FPRs, 246 SPRs ] PCIEnum: error, 14.0.48 req'd 00007FF4 bytes,no room in MEM map. ## ## ## ## ## ## ## ## ####### ## ####### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ###### ## ## ## ## ## ## ## ###### ## ## ## ## ## Version : 13.2, Metaware Build Released : July 25, 2005 Built on Jul 25 2005 10:18:27 Written by : Freescale Semiconductor Inc., PowerPC Apps, Austin, Texas System : Sandpoint X3 with Unity (PrPMC8245) Processor : MPC8245 V1.1 @ 200 MHz, 100 MHz memory Memory : Map B (CHRP) 128MB at CL=2 Copyright 1993-2005, by Freescale Inc. DINK32[MPC8245] {1} >>sb 115200 Baud rate changing to 115200...go ff000000 >> NetBSD/sandpoint Boot, Revision 1.0 >> (makoto@tc2120.ki.nu, Sat Jun 2 22:52:40 JST 2007) Sandpoint X3, 128MB SDRAM, Intel i82559 NIC 00:15:00 00:00:00: chip 1057,0006 card ffff,ffff rev 14 class 06,00,00 hdr 00 mem base 80000000 size 1000 00:11:00: chip 10ad,0565 card 0000,0000 rev 10 class 06,01,00 hdr 80 00:11:01: chip 10ad,0105 card 0000,0000 rev 05 class 01,01,8f hdr 80 i/o base 1000 size 10 i/o base 1010 size 10 i/o base 1020 size 10 i/o base 1030 size 10 i/o base 1040 size 10 i/o base 1050 size 10 00:13:00: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 mem base 80001000 size 1000 00:14:00: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 i/o base 1100 size 100 mem base 80002000 size 1000 00:15:00: chip 8086,1229 card 0e11,b144 rev 08 class 02,00,00 hdr 00 mem base 80003000 size 1000 i/o base 1200 size 40 mem base 80100000 size 100000 00:16:00: chip 8086,1229 card 8086,000c rev 08 class 02,00,00 hdr 00 mem base 80200000 size 1000 i/o base 1240 size 40 mem base 80300000 size 100000 MAC address 00:02:a5:3f:0d:d0, PHY 1 (02a8.0154) Try NFS load /netbsd net_open: client addr: 192.168.1.229 net_open: subnet mask: 255.255.255.0 net_open: net gateway: 192.168.1.1 net_open: server addr: 192.168.1.210 net_open: server path: /export/20070506/src/obj/destdir.sandpoint net_open: file name: /netbsd ... net_open: server addr: 192.168.1.210 ... net_open: server path: /export/20070506/src/obj/destdir.sandpoint 45520+2120 [4288+2547]=0xd6e0 entry=0x02000000, ssym=0x0200ba18, esym=0x0200d6e0 >> NetBSD/sandpoint Boot, Revision 1.0 >> (makoto@tc2120.ki.nu, Sat Jun 9 22:11:04 JST 2007) Sandpoint X3, 128MB SDRAM, Intel i82559 NIC 00:15:00 00:00:00: chip 1057,0006 card ffff,ffff rev 14 class 06,00,00 hdr 00 mem base 80000000 size 1000 00:11:00: chip 10ad,0565 card 0000,0000 rev 10 class 06,01,00 hdr 80 00:11:01: chip 10ad,0105 card 0000,0000 rev 05 class 01,01,8a hdr 80 i/o base 1000 size 10 i/o base 1010 size 10 00:13:00: chip 1045,c861 card 1045,c861 rev 10 class 0c,03,10 hdr 00 mem base 80001000 size 1000 00:14:00: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 i/o base 1100 size 100 mem base 80002000 size 1000 00:15:00: chip 8086,1229 card 0e11,b144 rev 08 class 02,00,00 hdr 00 mem base 80003000 size 1000 i/o base 1200 size 40 mem base 80100000 size 100000 00:16:00: chip 8086,1229 card 8086,000c rev 08 class 02,00,00 hdr 00 mem base 80200000 size 1000 i/o base 1240 size 40 mem base 80300000 size 100000 MAC address 00:02:a5:3f:0d:d0, PHY 1 (02a8.0154) Try NFS load /netbsd net_open: client addr: 192.168.1.229 net_open: subnet mask: 255.255.255.0 net_open: server addr: 192.168.1.210 net_open: server path: /export/20070506/src/obj/destdir.sandpoint net_open: file name: /netbsd ... net_open: filename: /netbsd.1 ... net_open: server addr: 192.168.1.210 ... net_open: server path: /export/20070506/src/obj/destdir.sandpoint 2542256+180256 [146752+140475]=0x2df070 entry=0x00090000, ssym=0x00328ad0, esym=0x0036f070 Stopped at netbsd:cpu_Debugger+0x10: lwz r0, r1, 0x14 db> c 00:00:00 0x78 = fc000000 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 4.99.20 (GENERIC) #122: Mon Jun 11 20:25:35 JST 2007 root@tc2120.ki.nu:/export/20070506/src/sys/arch/sandpoint/compile/obj/GENERIC total memory = 128 MB avail memory = 120 MB OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources. timecounter: Timecounters tick every 10.000 msec mainbus0 (root) cpu0 at mainbus0: Version 0x8081 (Revision 0x1014), ID 0 (primary) cpu0: HID0 91c000, powersave: 1 eumb0 at mainbus0 com2 at eumb0 ** com_attach_subr: : ns16550a, working fifo ociic0 at eumb0 pci0 at mainbus0 bus 0 pci0: i/o space, memory space enabled pchb0 at pci0 dev 0 function 0 pchb0: Motorola MPC8245 "Kahlua II" Host Bridge (rev. 0x14) pcib0 at pci0 dev 11 function 0: Symphony Labs 83C553 PCI-ISA Bridge (rev. 0x10) pcib0: slide0 at pci0 dev 11 function 1 slide0: Symphony Labs 82C105 IDE controller (rev. 0x05) slide0: bus-master DMA support present slide0: primary channel configured to native-PCI mode ** line 11, pin A (pci_intr_map in /export/20070506/src/sys/arch/sandpoint/pci/pci_machdep.c) = EPIC 6 slide0: using irq 22 for native-PCI interrupt atabus0 at slide0 channel 0 slide0: secondary channel configured to native-PCI mode atabus1 at slide0 channel 1 ohci0 at pci0 dev 13 function 0: Opti 82C861 (rev. 0x10) ** line 13, pin A (pci_intr_map in /export/20070506/src/sys/arch/sandpoint/pci/pci_machdep.c) = EPIC 2 ohci0: interrupting at irq 18 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: Opti OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered rtk0 at pci0 dev 14 function 0: Realtek 8139 10/100BaseTX (rev. 0x10) ** line 14, pin A (pci_intr_map in /export/20070506/src/sys/arch/sandpoint/pci/pci_machdep.c) = EPIC 3 rtk0: interrupting at irq 19 rtk0: Ethernet address 00:40:95:09:18:7f ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface ukphy0: OUI 0x000000, model 0x0000, rev. 0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0 at pci0 dev 15 function 0: i82559 Ethernet, rev 8 ** line 15, pin A (pci_intr_map in /export/20070506/src/sys/arch/sandpoint/pci/pci_machdep.c) = EPIC 4 fxp0: interrupting at irq 20 fxp0: Ethernet address 00:02:a5:3f:0d:d0 inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1 at pci0 dev 16 function 0: i82559 Ethernet, rev 8 ** line 16, pin A (pci_intr_map in /export/20070506/src/sys/arch/sandpoint/pci/pci_machdep.c) = EPIC 5 fxp1: interrupting at irq 21 fxp1: Ethernet address 00:90:27:60:92:11 inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isa0 at pcib0 com0 at isa0 port 0x3f8-0x3ff irq 4 ** com_attach_subr: : ns16550a, working fifo com0: console com1 at isa0 port 0x2f8-0x2ff irq 3 ** com_attach_subr: : ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 attimer0 at isa0 port 0x40-0x43: AT Timer pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker (CPU-intensive output) mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock pcppi0: attached to attimer0 biomask 10000018 netmask 100000f8 ttymask 100000f8 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "mftb" frequency 25000000 Hz quality 100 uhub1 at uhub0 port 1 uhub1: vendor 0x0451 product 0x1446, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, self powered wd0 at atabus0 drive 0slide0:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 : wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 9797 MB, 19906 cyl, 16 head, 63 sec, 512 bytes/sect x 20066251 sectors slide0:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 slide0:0:0: lost interrupt type: ata tc_bcount: 512 tc_skip: 0 slide0:0:0: lost interrupt type: ata tc_bcount: 0 tc_skip: 0 wd0: drive supports PIO mode 4slide0:0:0: lost interrupt type: ata tc_bcount: 0 tc_skip: 0 , DMA mode 2, Ultra-DMA mode 4 (Ultra/66) wd0(slide0:0:0): using PIO mode 4, DMA mode 2 (using DMA) boot device: root device: